Ditch water filter

When would you want to filter ditch water?

Water filters for third world countries

A water filter ditch water is considered the ultimate test among filters. Surface water, because of its "surface" exposure, quickly becomes contaminated by a variety of conditions. Such as bird droppings or waste from people living nearby. In the Netherlands there is in principle little reason to make drinking water from ditch water, however in third world countries where people have no access to alternatives this is done as an emergency solution. This is life threatening and to this day also claims many lives. When using our ditch water filter, however, this can be prevented. Our filters reduce the bacteria content to such an extent that the water is safe enough to drink.

It would be best if the ditch water were also properly boiled through first, but often people in developing countries are so poor that they can't afford the fuel to do this either. Even in this case, our ditch water filters are good enough to be safe to drink from.

Note that the dirtier the water, the sooner the filter element needs replacement.

For travelers

Ditch water filters are also useful for travelers looking for a way to get a quick drink on the go without relying on purchased water. Aqualogic offers top quality surface water filters at a great price, so you'll always have access to healthy, clean drinking water no matter where you are.

Ditch water filters

The combination of activated carbon and ultra-membranes in filtering ditch water
The most effective way to filter ditch water is to combine the filter elements activated carbon and ultra-membranes. Activated carbon is a type of carbon that has been slightly oxidized and therefore has many small pores. These pores can help remove dirt, chemicals, and other impurities from the water. This keeps out the coarsest dirt. After the ditch water passes the activated carbon, all harmful bacteria are stopped by ultra-membranes with tiny openings through which only h2o and any minerals can pass. Thus, the water is safe and drinkable.

Ditch water filtering

How healthy is filtered ditch water?

While filtering ditch water can help purify the water from infections, it is important to remember that the filtered water can only be used for drinking as an emergency solution. There may still be microorganisms and bacteria in the water that are not stopped by the filter. Also remember that the more intensively the filters are used, the sooner they should be replaced.

Note: A TDS meter cannot be used to measure how healthy the water is.

Ditch water purification

Safe and purified water accessible to all

At Aqualogic, we are committed to providing people around the world with safe and purified water. That's why we support humanitarian projects dedicated to purifying ditch water and providing people with access to clean drinking water. We believe that everyone has the right to have access to healthy, clean drinking water, no matter where they live.

Ditch water filtration system

What is the difference between a simple water filter and a ditch water filtration system?

A simple water filter is a smaller device that can be used to filter water from a tap, faucet, or bottle. They are often easy to use and cost-effective. A ditch water filtration system is often a more complete system designed specifically to filter water from ditches, canals, or soil. They are usually more efficient and can remove more impurities from the water, but also often more expensive.

Ditch water filter for at home

If your backyard borders a ditch, you can use a ditch water filter for your home. However, we do recommend choosing rainwater or groundwater as natural water to filter at all times. Ditch water filtration is an emergency solution, and while it is possible to turn it into safe drinking water with our filters, we do not recommend it as a long-term solution.

Change ditch water filter

It is important to change your ditch water filter regularly. Ditch water is dirty water which causes the filter elements to clog up quickly. If you want to replace your ditch water filter, you can turn to Aqualogic. We offer a wide range of ditch water filters, so you can always find a suitable filter for your emergency. Let us help you make sure you always have access to healthy, clean drinking water by replacing your ditch water filter with one of our top-quality filters. Contact us today to discuss the best option for your specific needs. We are happy to help you further ensure that you can enjoy the best possible filtered ditch water in your household.

Suitable Water Sources for Use with Our AQUA Logic Emergency Water Filters

• Rainwater: Easy to collect and directly filter.
• Surface Water: For example, from ditches, lakes, rivers, and streams.
  Tip: For optimal results, we recommend pre-filtering surface water with a cloth, such as a tea towel, to remove large contaminants.
• Spring Water: Water from natural springs, if accessible.
• Snow and Ice: Melted snow or ice can be filtered.
  Note: Do not use snow or ice that is contaminated with salt or has lost its clear white color.
• Groundwater: Water from shallow wells or boreholes.
  Note: If the groundwater contains iron, it can be easily de-ironed by adding oxygen to the water. This can be done by pouring the water back and forth between two buckets. Allow the water to settle so that the iron particles accumulate at the bottom. The clear water on top can then be filtered with the AQUA Logic emergency water filter.
• Rain Puddles: Water collected in depressions after rainfall. Pre-filter large contaminants before filtering.
• Condensed Water: Water collected through condensation, such as with plastic sheets or collection systems.

Note: This filter is not suitable for purifying saltwater or heavily chemically contaminated water.

Groundwater and De-Ironing
Groundwater may contain iron, which can cause a metallic taste and discoloration. You can easily remove iron from the water before filtering it with the AQUA Logic emergency water filter. Follow these steps:

1. Add Oxygen: Pour the groundwater back and forth between two buckets several times. This allows the water to absorb oxygen, oxidizing the iron.
2. Let it Settle: Allow the water to sit for several hours so the oxidized iron particles settle at the bottom.
3. Separate the Water: Carefully scoop or pour the clear water from the top into another bucket, leaving the iron particles at the bottom.
4. Filter: The clear water is now ready to be filtered with the AQUA Logic emergency water filter.

This simple method works well for water with low to moderate iron content. For water with high iron levels, additional techniques or tools may be necessary.