AQUA Logic - Tap - Anti Limescale - 10 INCH - (On-tap Water Softener)

On-Tap Water filter for reducing limescale in tap water at the kitchen faucet or in camping vehicles.

117,00 *
Price per unit
Out of Stock This product is not in stock
Shipping costs € 0,00

Weight: 1,500 kg

Product number: 10067

Variation:
AQUA Logic - Tap - Anti Limescale - 10 INCH - (On-tap Water Softener)
AQUA Logic - Tap - C-Ultra - 0,03mcr - 10 INCH - Gen2 - (tap water filter)
 


Product specification

Usage

Way of use Directly at water tap

Filtration properties

Pore size / Sieve perforation Does not apply
Reduces Calcium and Magnesium

Technical information

Connection type M22 tap adapter + M24 adapter ring

Package contents

10" Tap filter housing
Tap adapter M22 with supply hose (120cm)
Adaptor ring M22 x M24
Tensioning bracket to open the filter housing
Date sticker (for marking the year when the filter was commissioned)
Filter Element - Inline - Anti Limescale - 10 INCH
User manual (Dutch, English)

Product description

The AQUA Logic Tap - Anti-Limescale is a water filter that can be connected to an existing (mixer) tap to soften the water. With the switch faucet adapter, you can choose between water directly from the tap or softened water from the water softener.

Discover this solution for limestone issues in the kitchen or your camping vehicle with the AQUA Logic Anti-Scale water filter cartridge. Our product is specially designed to treat hard tap water, often saturated with dissolved calcium hydrogen carbonate and magnesium salts. When this water is heated, it can lead to the formation of limescale, also known as scale, on various surfaces.

The filter cartridge is filled with cationic resin that removes calcium and magnesium from the water. This makes it ideal for producing a small quantity of softened water, particularly suitable for point of use household use and in camping vehicles.

Our Mission

AQUA Logic drinking water filters have been developed and produced by Innologic BV on behalf of the IBOTA Foundation. The initiative stemmed from the demand for safe and clean drinking water in emergency situations such as disaster and underdeveloped areas.
The IBOTA Foundation aims to provide filters for drinking water treatment in disaster areas and any other situation where clean and safe drinking water is not readily available. Components of these drinking water filters are produced in India as a project for underprivileged youth. By purchasing this drinking water filter, you contribute to this project.

Commissioning the Anti-Limescale Water Softener

1. When commissioning the filter, it is advisable to release air from the filter. Hold the filter upside down while it fills, allowing any present air in the filter to escape.
2. Let a new filter element run for 1 minute before use. After this, the filtered water is suitable for consumption.

Technical Details:

• Cartridge capacity: 4 cubic meters/°F (hardness) @ 1.5 liters/minute.
• Scientific formula: 4 cubic meters @ 1°F (hardness). This means that the total treatment capacity may vary based on the water hardness level. For example, 4000 liters @ 1°F and 400 liters @ 10°F.

(French degrees (°F) is a unit used to indicate water hardness, with a higher number indicating harder water.)

This means that the AQUA Logic water filter cartridge is effective for treating 4 cubic meters of water with a hardness of 1°F. However, the total treatment capacity may vary depending on how hard the water is. For instance, if the water has a hardness of 1°F, the cartridge can treat 4000 liters, but if the water has a hardness of 10°F, the cartridge can only treat 400 liters before it may need replacement. In summary, the filter performs better with softer water and may treat less with harder water.

Estimated Lifespan: approximately 6 months or 2,500 liters (depending on water quality and flow rate) with a medium water hardness up to a maximum of 14 °dH.

User Manual for Regenerating the Anti-Limestone Filter Element:

1. Close the water supply and, if applicable, open the tap to release water pressure from the system.
2. Unscrew the filter housing counterclockwise. The filter element will detach along with the housing.
   Tip: Perform this operation over a sink or basin. Hold an AQUA Logic Tap filter upside down to collect any remaining water in the bowl. 
3. Pour out the remaining water and let the filter element drain for 30 minutes.
4. Measure 500 milliliters of water and add 100 grams of (kitchen) salt. Stir until the salt is completely dissolved.
5. Place the filter element in the bowl of the filter housing.
6. Pour the salty water into the filter element in the bowl and let it sit for at least one hour.
7. Pour out the salty water afterward and let the cartridge drain for approximately 30 minutes.
8. Put the cartridge back into the housing and screw the filter housing tightly.
   Note: Ensure that the flat ring and the black O-ring are in the correct positions.
9. Open the water supply and flush the system for one minute. The anti-scale filter is now ready for use.

Say goodbye to limescale problems and enjoy the convenience of soft water during your travels with the AQUA Logic Anti-Scale water filter cartridge. Make your camping experience more comfortable and ensure the longevity of your equipment by reducing limescale buildup.

Please contact us

Do you have a question about this product? Ask us your question info@innologic.nl +31-578611654
Questions? We are happy to help you.

Questions? We are happy to help you.

Tel: +31 (0) 578611654
Email: info@innologic.nl

Adres: Zwarteweg 10A, 8181 PD Heerde, The Netherlands
Website: www.innologic.nl

VAT identification number: NL808812622B01
Chamber of Commerce number: 05065655 
Bank Number: IBAN NL40 RABO 0370283546
BIC/SWIFT: RABONL2U