AQUA Logic - O3 - Micro Cell

The O3 Micro Cell typically lasts for a minimum of six months or longer.

Replacement of the O3 Micro Cell:

To ensure optimal performance of the system, we recommend replacing the O3 Micro Cell every season. However, please note that this may vary depending on usage. If the system is used frequently and continuously, replacement may be necessary sooner than when the system is used intermittently for short durations.

If the O3 Micro Cell is less than six months old, we advise checking the system for potential issues before replacing the O3 Micro Cell. Usually, there might be another cause since the O3 Micro Cell typically lasts for a minimum of six months or longer.

1. Turn off the AQUA Logic Electrolysis unit with the O3 Micro Cell by either switching off the system or disconnecting the plug with the DC connector.
2. Place the provided plastic ring around the AQUA Logic Electrolysis unit. Press the plastic ring on the clips until both clips are released. Now, carefully remove the O3 Micro Cell from the electrolysis unit.
3. Insert the replacement O3 Micro Cell with both clips into the corresponding holes of the electrolysis unit. Press the clips firmly to ensure they are securely in place. Then, press both legs of the clips against a firm surface until you hear a click.
4. Reconnect the system after completing this procedure.

Tip: Double-check for ozone production by placing the electrolysis unit with the O3 Micro Cell in a glass of water to see if ozone bubbles are produced.