The AQUA Logic Inline XXL 3/4 - Ultra Washable - 0.01 mcr - 20 INCH drinking water filter. Easily installed between existing water pressure systems, it ensures clean, safe drinking water for your entire household. Its ample capacity guarantees a steady water supply. Plus, the reusable Ultra Membranes can be washed to maintain peak performance, ensuring longevity and efficiency.
Filter Element / Cartridge
Ultra membranes with a pore size of 0.01 micron.
Thanks to the Ultra-Membrane technology in this water filter, it filters:
Pathogenic organisms: Log 6 bacterial reduction: > 99.9999% (including Cholera, Shigella, Typhoid, Klebsiella Terrigenam, Legionella and e. Coli) and Cysts / Protozoa (including Giardia and Cryptosporidium)
Micro- and nanoplastics from a size of 0.01 micron (100 nanometers)
This means that this one filter element is able to produce safe and clean drinking water of high quality.
Ultra version - the best filter properties
Ultra at AQUA Logic stands for filters that are equipped with Ultra membrane filters with a pore size of only 0.01 microns. Ultra-membrane water filters are the most modern and reliable method of removing pathogenic micro-organisms from water.
Mounting the Inline XXL 3/8 - Water Filter
• To connect the filter, the supplied 3/4 inch nipples must be screwed into the cover, after which the filter is placed between the water pipe.
(Note: the filter housing already holds sealing rings by which the nipples don't need an O-ring or Teflon tape attached)
Pay attention to the water flow direction (IN/OUT).
• The filter system can be mounted using the supplied wall bracket. Please note that there must be at least 10 cm space under the system to allow unscrewing of the bowls and filter cartridges.
• First of all, the recommended replacement date of the water filter must be indicated on the supplied date sticker and must be visibly pasted on the water filter. The recommended period of use (daily usage) is 2 year.
Note: The actual life span of this water filter will depend on the level of contamination in the water source.
• The filter must be bled. Press and hold the (black) bleed button on top of the filter cover (while pressurized / closed tap) until all the air has escaped.
• First flush a new filter element with 8-10 liters of water. After this, the filtered water is suitable for consumption.
How to wash the PVDF Ultra Membranes
Depending on the degree and type of water pollution, the surface of the filter element can become clogged. This can be recognized by the decrease in the amount of outflowing water. If this is the case you can do the following to wash the ultra membranes:
- Turn off the water supply and turn on the tap to relieve the water pressure from the system.
- Place a bowl under the filter to collect water coming out when opening it. Open the filter housing by turning the blue plastic ring counter clockwise.
- Take the filter cartridge and open it by pulling off the colored parts while twisting.
- Rinse the membranes with water. Use your hands to wash the membranes between your hands, using back and forth motions as you rinse them.
- Replace the filter element and tighten the housing again, but do not do this too tightly. When closing the housing, make sure that the rubber sealing ring is properly positioned and clean.
- The filter should be bled again after maintenance by pressing and holding the bleed button until all the air has escaped. Even after each maintenance, we recommend that you do not use the first couple of litres water for consumption.
Although the filter housing is frost-resistant, it is important to drain the water filter and the system before winter storage and allow the filter elements to dry thoroughly (see also storage instructions). This prevents the risk of freezing and damage to the water filter.
Lifespan
The recommended maximum duration of use (with continuous use) is 2 years. Therefore, the filter element must be replaced after 2 years. Periodically check the expiration date that you have written on the date sticker.
Note: The actual life of the filter element depends on the degree of contamination in the water to be treated. As long as water comes out of the filter, it is suitable drinking water because it has been filtered through the ultra membranes, provided that the water filter is used as explained in this user manual.
How to store after use
We recommend adding Cosil47 water filter disinfection solution. Rinse the filter again before using it again.
Wet: store the filter element (for example in a plastic bag) in the refrigerator.
Dry: Find a suitable place to let the filter element dry without mold formation.
And last but not least
Care is important when using and maintaining this water filter, as it concerns the safety of your drinking water!
