AQUA Logic - Filter Element - Inline XL - Ultra Washable - 0,01mcr - 10 INCH

Replacement water filter cartridge for the AQUA Logic - Inline XL 3/4 - Ultra Washable - 0.01mcr - 10 INCH drinking water filter.

97,00 *
Price per unit
In stock
Shipping costs € 0,00

Weight: 0,800 kg

Product number: 21002

EAN: 8720726095747

Variation:
AQUA Logic - Filter Element - Inline XL - Ultra Washable - 0,01mcr - 10 INCH
AQUA Logic - Filter Element - Inline XXL - Ultra Washable - 0,01mcr - 20 INCH
remove add


Product specification

Suitable for AQUA Logic

Inline Jumbo 10 INCH Water Filter

Usage

Way of use Built-in water filter

Filtration properties

Filter material Ultra membranes
Pore size / Sieve perforation 0,01 - 0,03 micron
Bacteria reduction LOG 6 | >99.9999%
Suitable against Protozoa (including Giardia and Cryptosporidium) and bacteria (including Cholera, Typhus, Legionella and E. Coli)

Technical information

Product Dimensions Ø 11,8cm x 25cm
Connection type Clamp into the filter housing
Flow capacity 10-15 L / min
Shelf life Unused, the filter has an almost unlimited shelf life (store in a cool, dry and dark place)

Package contents

Filter Element - Inline XL - Ultra Washable - 0,01mcr - 10 INCH

Product description

Ultra membranes with a pore size of 0.01 micron.
Thanks to the Ultra-Membrane technology in this water filter, it filters:
Pathogenic organisms: Log 6 bacterial reduction: > 99.9999% (including Cholera, Shigella, Typhoid, Klebsiella Terrigenam, Legionella and e. Coli) and Cysts / Protozoa (including Giardia and Cryptosporidium)
Micro- and nanoplastics from a size of 0.01 micron (10 nanometers)

This means that this one filter element is able to produce safe and clean drinking water of high quality.

Ultra version - the best filter properties

Ultra at AQUA Logic stands for filters that are equipped with Ultra membrane filters with a pore size of only 0.01 microns. Ultra-membrane water filters are the most modern and reliable method of removing pathogenic micro-organisms from water.

 

How to wash the PVDF Ultra Membranes

Depending on the degree and type of water pollution, the surface of the filter element can become clogged. This can be recognized by the decrease in the amount of outflowing water. If this is the case you can do the following to wash the ultra membranes:

  1. Turn off the water supply and turn on the tap to relieve the water pressure from the system.
  2. Place a bowl under the filter to collect water coming out when opening it. Open the filter housing by turning the blue plastic ring counter clockwise.
  3. Take the filter cartridge and open it by pulling off the colored parts while twisting.
  4. Rinse the membranes with water. Use your hands to wash the membranes between your hands, using back and forth motions as you rinse them.
  5. Replace the filter element and tighten the housing again, but do not do this too tightly. When closing the housing, make sure that the rubber sealing ring is properly positioned and clean.
  6. The filter should be bled again after maintenance by pressing and holding the bleed button until all the air has escaped. Even after each maintenance, we recommend that you do not use the first couple of litres water for consumption.

Although the filter housing is frost-resistant, it is important to drain the water filter and the system before winter storage and allow the filter elements to dry thoroughly (see also storage instructions). This prevents the risk of freezing and damage to the water filter.

Lifespan

The recommended maximum duration of use (with continuous use) is 2 years. Therefore, the filter element must be replaced after 2 years. Periodically check the expiration date that you have written on the date sticker.

Note: The actual life of the filter element depends on the degree of contamination in the water to be treated. As long as water comes out of the filter, it is suitable drinking water because it has been filtered through the ultra membranes, provided that the water filter is used as explained in this user manual.

How to store after use

We recommend adding Cosil47 water filter disinfection solution. Rinse the filter again before using it again.
Wet: store the filter element (for example in a plastic bag) in the refrigerator.
Dry: Find a suitable place to let the filter element dry without mold formation. 

And last but not least

Care is important when using and maintaining this water filter, as it concerns the safety of your drinking water!

Please contact us

Do you have a question about this product? Ask us your question info@innologic.nl +31-578611654
Questions? We are happy to help you.

Questions? We are happy to help you.

Tel: +31 (0) 578611654
Email: info@innologic.nl

Adres: Zwarteweg 10A, 8181 PD Heerde, The Netherlands
Website: www.innologic.nl

VAT identification number: NL808812622B01
Chamber of Commerce number: 05065655 
Bank Number: IBAN NL40 RABO 0370283546
BIC/SWIFT: RABONL2U