Discover this solution for limescale issues in the kitchen or your camping vehicle with the AQUA Logic Anti-Limescale water filter cartridge. Our product is specially designed to treat hard tap water, often saturated with dissolved calcium hydrogen carbonate and magnesium salts. When this water is heated, it can lead to the formation of limescale, also known as scale, on various surfaces.
The filter cartridge is filled with cationic resin that removes calcium and magnesium from the water. This makes it ideal for producing a small quantity of softened water, particularly suitable for household use in camping vehicles.
Technical details:
• Cartridge capacity: 4 cubic meters/°F (hardness) @ 1.5 liters/minute
• Scientific formula: 4 cubic meters @ 1°F (hardness). This means that the total treatment capacity may vary based on the water hardness level. For example, 4000 liters @ 1°F and 400 liters @ 10°F.
(French degrees (°F) is a unit used to indicate water hardness, with a higher number indicating harder water.)
This means that the AQUA Logic water filter cartridge is effective for treating 4 cubic meters of water with a hardness of 1°F. However, the total treatment capacity may vary depending on how hard the water is. For instance, if the water has a hardness of 1°F, the cartridge can treat 4000 liters, but if the water has a hardness of 10°F, the cartridge can only treat 400 liters before it may need replacement. In summary, the filter performs better with softer water and may treat less with harder water.
Lifespan indication: approx. 6-12 months or 2,500 l (depending on the water quality and flow rate) with medium water hardness up to a maximum of 14 °dH
User manual for regenerating the anti-scale filter element:
-
Close the water supply, and if applicable, open the tap to release the water pressure from the system.
-
Unscrew the filter housing counterclockwise. The filter element will detach along with the housing. Tip: Perform this operation over a sink or basin. Hold an AQUA Logic Tap filter upside down to collect any remaining water in the bowl.
-
Pour out the remaining water and let the filter element drain for 30 minutes.
-
Measure 500 milliliters of water and add 100 grams of (kitchen) salt. Stir until the salt is completely dissolved.
-
Place the filter element in the bowl of the filter housing.
-
Pour the salty water into the filter element in the bowl and let it sit for at least one hour.
-
Pour out the salty water afterward and let the cartridge drain for approximately 30 minutes.
-
Put the cartridge back into the housing and screw the filter housing tightly. Note: Ensure that the flat ring and the black O-ring are in the correct positions.
-
Open the water supply and flush the system for one minute. The anti-scale filter is now ready for use.
Say goodbye to limescale problems and enjoy the convenience of soft water during your travels with the AQUA Logic Anti-Limescale water filter cartridge. Make your camping experience more comfortable and ensure the longevity of your equipment by reducing limescale buildup.
